Bobon Copper

Guides

C17200 vs C17510: high-strength or high-conductivity beryllium copper

The two beryllium coppers trade strength for conductivity. C17200 is the high-strength grade, reaching about 1,300 MPa and above at 22 to 28 % IACS. C17510 is the high-conductivity grade, at about 800 MPa and 45 to 48 % IACS. Use C17200 for small signal springs and C17510 where the contact carries current or heat.

Side-by-side data

C17200C17510
UNSC17200C17510
EquivalentsEN CuBe2 / CW101C; JIS C1720; GB QBe2 (TBe2)EN CuNi2Be / CW110C
Composition %Be 1.80 – 2.00, Co + Ni ≥ 0.20, Co + Ni + Fe ≤ 0.60Ni 1.4 – 2.2, Be 0.2 – 0.6, Co ≤ 0.3
Conductivity %IACS22 – 2845 – 48
Tensile strength MPa410 – 1520310 – 793
TempersA (TB00), 1/4H (TD01), 1/2H (TD02), H (TD04), AT (TF00), 1/2HT (TH02), HT (TH04)TB00, TD02, TD04, TF00, TH02, TH04
Elastic modulus131 GPa132 GPa
Density8.25 g/cm³8.77 g/cm³

Tensile strength is the range across supplied tempers. Full composition, tempers and physical properties are on each grade page.

Choose C17200 when

Choose C17510 when

Notes

Both are precipitation-hardened and are available mill hardened or in heat-treatable tempers. Where beryllium-free material is required, copper-titanium replaces C17200 and a Corson alloy such as C7035 is the usual alternative to C17510.

Questions buyers ask

Is there a beryllium-free alternative to C17510?

C7035 is the closest standard option: about 50 % IACS with 770 to 970 MPa. Check bend formability and stress relaxation against your design before switching.

Need a recommendation for a specific part?

Tell us the part function, strip thickness and performance targets. We reply within one working day, and sample coils are available for comparative trials.

Material development support