Copper alloy strip for terminals and connectors, supplied to stamping plants worldwide since 2006
From Shenzhen, China, we supply high-performance copper alloy strip to stamping plants and to manufacturers of connectors, terminals, shielding and precision stamped parts. Every coil ships with its test certificate.
Alloys we supply
| Grade | UNS | Conductivity %IACS | Tensile strength MPa | Typical use |
|---|---|---|---|---|
| High-strength spring alloys | ||||
| C17200 | C17200 | 22 – 28 | 410 – 1520 | Connector contacts and terminals |
| C1990 | C19900 | 8 – 13 | 885 – 1180 | Miniature connector contacts |
| YCuT-FX | C19900 | 13 | 985 – 1115 | Miniature connectors |
| C17510 | C17510 | 45 – 48 | 310 – 793 | Power connectors |
| Connector alloys: strength with conductivity | ||||
| C7025 | C70250 | ≥ 40 | 620 – 860 | Fine-pitch connector terminals |
| C7035 | C70350 | ≈ 50 | 770 – 970 | Miniaturised connector terminals |
| NB109 | C19025 | 40 | 440 – 590 | Connector terminals |
| NB105 | C19020 | 50 | 300 – 550 | Connector terminals |
| C19010 | C19010 | ≥ 55 | 360 – 590 | Automotive connector terminals |
| C50710 | C50710 | ≥ 32 | 315 – 705 | Automotive terminals |
| C50715 | C50715 | ≥ 35 | 390 – 620 | Automotive connector terminals |
| Phosphor bronze | ||||
| C5191 | C51900 | 13 – 15 | 315 – 685 | Connector contacts |
| C5210 | C52100 | ≈ 12 | 470 – 885 | Connector contacts |
| C5240 | C52400 | ≈ 11 | 650 – 1000 | Miniature connector contacts |
| C5102 | C51000 | 15 | 455 – 738 | Electrical and electronic connectors |
| High-conductivity copper and lead frame alloys | ||||
| C19400 | C19400 | ≥ 60 | 365 – 550 | Semiconductor lead frames |
| C1020 | C10200 | ≥ 100 | 195 – 315 | Busbars and power terminals |
| C18140 | C18140 | 85 | 393 – 490 | High-current connector terminals |
| C10700 | C10700 | ≥ 100 | – | Commutator segments |
| C10100 | C10100 | ≥ 101 | 195 – 315 | Vacuum and electron devices |
| C19210 | C19210 | 80 | 296 – 490 | IC lead frames |
| C19720 | C19720 | 80 | 365 – 505 | Power distribution terminals |
| C1100 | C11000 | 101 | 262 – 379 | Busbars and electrical conductors |
| C18150 | C18150 | ≈ 80 | 360 – 440 min | Resistance welding electrodes, wheels and tips |
| C14415 | C14415 | ≥ 90 | 195 – 510 | Lead frames for power semiconductors |
| C151 | C15100 | ≥ 90 | 245 – 490 | Lead frames for power devices |
| Brass, nickel silver and copper-nickel | ||||
| C2680 | C26800 | ≈ 27 | 275 – 620 | General-purpose terminals |
| C70600 | C70600 | ≈ 9 | 275 | Seawater piping |
| C2600 | C26000 | 28 | 372 – 648 | Terminals and connectors |
| C7521 | C75200 | 6 | 448 – 586 | EMI shielding cans and frames |
| C4250 | C42500 | ≥ 26 | 295 – 650 | Automotive terminals |
| Nickel aluminium bronze: rod, bar, plate and castings | ||||
| C63000 | C63000 | 7 | 689 – 758 | Landing gear bushings and bearings |
| C95800 | C95800 | 7 | ≥ 585 | Pump casings and impellers |
Who we serve
- Stamping plants and terminal makers outside China that run copper alloy strip every day, and the etching and plating houses supplying OEM and tier-one programmes
- Automotive and new-energy vehicle suppliers: high-current terminals, busbars, relay springs and charging connectors
- Consumer electronics supply chains: smartphones, wearables, laptops and tablets, for spring contacts, EMI shielding, camera module springs and heat spreaders
- Power tool and battery pack makers: battery terminals, charging contacts, switch and trigger springs
- Data centre and AI server suppliers: high-speed connector and socket contacts, power connectors, busbars and cold plates
- Semiconductor packaging and test: lead frames and test socket contacts
- Connector and terminal manufacturers: board-to-board, FPC, USB Type-C, I/O and RF connectors, SIM and card sockets, wire-to-board terminals
- Electrical equipment makers: transformer strip, cable strip and switchgear conductors in oxygen-free copper
- Marine, offshore and energy equipment makers: pump and valve components, bushings, seawater pipework and downhole tooling
- Aerospace and industrial bearing makers: high-load bushings and wear parts
- We work with sourcing and procurement teams, materials and design engineers, and supplier quality engineers.
How we work
- Material selection. Tell us the part, the forming steps and the performance target; we recommend the grade and temper and explain the trade-offs.
- Traceability. Each coil is tied to its heat lot and supplied with the test certificate.
- Custom dimensions. Strip thickness by alloy: beryllium copper, copper-titanium and other high-performance alloys 0.03 mm to 0.25 mm; phosphor bronze and other alloys 0.08 mm to 1.8 mm; pure copper 0.10 mm to 6.0 mm. Slit to the width you specify. See thin-gauge strip.
- Response. Quotations and technical questions are answered within one working day.
Working with engineering teams
We support material selection and trials during product development. See material development support and the selection guides.
Request a quotation
Send us the grade, temper, thickness, width and quantity. We reply within one working day.
Send RFQ