Products / C95800
C95800 Nickel Aluminium Bronze Castings
C95800 is the standard cast nickel aluminium bronze for seawater service. It resists seawater corrosion, cavitation and erosion, with a minimum tensile strength of 585 MPa as sand cast, and is used for pump and valve bodies, impellers and propellers.
Equivalent designations
| System | Designation |
|---|---|
| UNS | C95800 |
| EN | CuAl10Fe5Ni5-C / CC333G |
| GB | ZCuAl9Fe4Ni4Mn2 |
Typical applications
- Pump casings and impellers
- Valve bodies and seats
- Propellers and propeller hubs
- Offshore and desalination equipment
- Bushings and wear rings
Chemical composition (%)
| Element | Content |
|---|---|
| Cu | ≥ 79.0 |
| Al | 8.5 – 9.5 |
| Ni | 4.0 – 5.0 |
| Fe | 3.5 – 4.5 |
| Mn | 0.8 – 1.5 |
Physical properties
| Property | Value |
|---|---|
| Density | 7.6 g/cm³ |
| Elastic modulus | 110 – 128 GPa |
| Electrical conductivity | ≈ 7 % IACS |
Tempers and tensile strength
| Temper | Condition | Tensile strength (MPa) |
|---|---|---|
| As cast | Sand casting, minimum | ≥ 585 |
Minimum value to ASTM B148. The test certificate for each lot states the measured values.
Supply range
| Item | Value |
|---|---|
| Form | Castings, cast bar and machined parts to drawing |
| Sizes | Supplied to your specification |
| Minimum order | Quoted with each enquiry |
| Lead time | Quoted with each enquiry |
Questions buyers ask
Why is nickel aluminium bronze used in seawater?
It forms a protective oxide film that resists seawater corrosion, and it withstands cavitation and erosion better than most other copper alloys, with strength comparable to mild steel.
What documents come with each shipment?
The original mill test certificate for the heat lot and a packing list with coil numbers. RoHS and REACH declarations are provided on request.
Request a quotation
Send us the grade, temper, thickness, width and quantity. We reply within one working day.
Send RFQ