Copper alloy strip for data centres and AI servers
We supply strip to the stamping plants and connector makers behind AI servers, switches and data centre power equipment: high-strength thin strip for signal contacts, and high-conductivity copper for power.
High-speed connector and socket contacts
Processor sockets and high-speed board connectors pack thousands of contacts at fine pitch, so each contact is stamped from very thin, very strong strip. We supply these grades from 0.03 mm; see thin-gauge strip.
Power connectors and rack power distribution
Rack power has risen with every server generation, and the contacts that carry it need high conductivity to stay cool together with enough strength to hold their force.
| Grade | UNS | Conductivity %IACS | Tensile strength MPa | Alloy |
|---|---|---|---|---|
| C18140 | C18140 | 85 | 393 – 490 | C18140 Copper-Chromium-Zirconium Strip |
| C17510 | C17510 | 45 – 48 | 310 – 793 | C17510 High-Conductivity Beryllium Copper Strip |
| C14415 | C14415 | ≥ 90 | 195 – 510 | C14415 Copper-Tin Strip (CuSn0.15) |
| C19010 | C19010 | ≥ 55 | 360 – 590 | C19010 Copper-Nickel-Silicon Strip |
Busbars, cold plates and heat spreaders
Pure copper for busbars and for the cold plates and heat spreaders of liquid-cooled servers.
How we supply stamping plants
- Strip slit to each width on your list, in the thickness and temper your tooling was set up for. Thickness by alloy: beryllium copper, copper-titanium and other high-performance alloys 0.03 mm to 0.25 mm; phosphor bronze and other alloys 0.08 mm to 1.8 mm; pure copper 0.10 mm to 6.0 mm.
- Quoted to the UNS, EN or JIS designation on your drawing; we confirm the equivalent before quoting.
- Every coil carries its lot number and ships with the test certificate, so incoming inspection has what it needs.
- Repeat orders against a forecast or a blanket order, shipped by sea or air. See export supply and supply to Europe.
- Samples and small qualification lots with the same documents as production shipments.
What to send for a quotation
Grade and temper, thickness and width with tolerances, monthly or annual quantity, and the destination port. If the grade is still open, send the part drawing and the current it carries and we will propose grades with the trade-offs.
Related guides
Request a quotation
Send us the grade, temper, thickness, width and quantity. We reply within one working day.
Send RFQ