Bobon Copper

Products / C70350

C7035 Copper-Nickel-Cobalt-Silicon Strip

C7035 is a cobalt-bearing Corson alloy produced to very high strength tempers while keeping conductivity near 50 % IACS. It is used where a thinner strip must carry the same contact force: miniaturised connectors, CPU sockets and board-to-board connectors.

Equivalent designations

SystemDesignation
UNSC70350
ENCuNi1Co1Si
JISC7035

Typical applications

  • Miniaturised connector terminals
  • CPU sockets
  • Board-to-board connectors
  • Relay and switch springs
  • Heat spreader plates

Chemical composition (%)

ElementContent
Ni1.0 – 2.5
Co1.0 – 2.0
Si0.5 – 1.2
CuBalance

Physical properties

PropertyValue
Density8.82 g/cm³
Elastic modulus131 GPa
Electrical conductivity≈ 50 % IACS
Thermal conductivity200 W/(m·K)

Tempers and tensile strength

TemperConditionTensile strength (MPa)
TM04Mill hardened770 – 900
TM06Mill hardened840 – 970

Values follow the limits of the governing standard. The mill test certificate for each lot states the measured values.

Supply range

ItemValue
FormCoil
Thickness and widthSupplied to your specification
Minimum orderQuoted with each enquiry
Lead timeEx-stock items ship within 48 hours; other items quoted with each enquiry

Questions buyers ask

How does C7035 differ from C7025?

C7035 replaces part of the nickel with cobalt. It reaches higher strength than C7025 at a slightly higher conductivity, so it suits thinner gauges and smaller contacts. C7025 remains the more economical choice where its strength is enough.

What documents come with each shipment?

The original mill test certificate for the heat lot and a packing list with coil numbers. RoHS and REACH declarations are provided on request.

Related selection guides

Request a quotation

Send us the grade, temper, thickness, width and quantity. We reply within one working day.

Send RFQ