C5191 vs C5210 vs C5240: phosphor bronze grades compared
The three grades differ in tin content: about 6 %, 8 % and 10 %. More tin gives more strength and spring force and slightly less conductivity, at a higher price. C5191 is the general-purpose grade, C5210 is the standard spring grade, and C5240 is for miniature springs that need 850 MPa and above.
Side-by-side data
| C5191 | C5210 | C5240 | |
|---|---|---|---|
| UNS | C51900 | C52100 | C52400 |
| Equivalents | EN CuSn6 / CW452K; JIS C5191; GB QSn6.5-0.1 | EN CuSn8 / CW453K; JIS C5210; GB QSn8-0.3 | JIS C5240 |
| Composition % | Sn 5.5 – 7.0, P 0.03 – 0.35, Cu + Sn + P ≥ 99.5 | Sn 7.0 – 9.0, P 0.03 – 0.35, Cu + Sn + P ≥ 99.7 | Sn 9.0 – 11.0, P 0.03 – 0.35, Cu + Sn + P ≥ 99.7 |
| Conductivity %IACS | 13 – 15 | ≈ 12 | ≈ 11 |
| Tensile strength MPa | 315 – 685 | 470 – 885 | 650 – 1000 |
| Tempers | O, 1/4H, 1/2H, H, EH | 1/2H, H, EH, SH, ESH | H, EH, SH, ESH, XSH |
| Elastic modulus | 110 GPa | 110 GPa | 105 GPa |
| Density | 8.83 g/cm³ | 8.80 g/cm³ | 8.78 g/cm³ |
Tensile strength is the range across supplied tempers. Full composition, tempers and physical properties are on each grade page.
Choose C5191 when
- The part is a general terminal, clip or contact and cost is the main driver
- Deep forming or tight bends are needed in softer tempers
Choose C5210 when
- The spring must survive many cycles or hold more force than C5191 gives
- A spring-grade specification (JIS H3130) is called out on the drawing
Choose C5240 when
- The contact is miniaturised and C5210 in SH or ESH is not strong enough
- A lower-cost alternative to copper-titanium or beryllium copper is wanted for a low-current spring
Notes
All three are solid-solution alloys hardened by rolling, so strength comes from the temper and no heat treatment is involved. Conductivity is low across the family, 11 to 15 % IACS, so phosphor bronze suits signal and low-current contacts.
Questions buyers ask
When is phosphor bronze not enough?
When the contact carries significant current or runs hot. A copper-nickel-tin or Corson alloy conducts three to four times better and relaxes less at temperature.
Need a recommendation for a specific part?
Tell us the part function, strip thickness and performance targets. We reply within one working day, and sample coils are available for comparative trials.
Material development support