Oxygen-free copper strip: C1020, C10100 and their EN, ASTM and GB equivalents
The same oxygen-free copper is ordered under different names. JIS C1020 corresponds to UNS C10200, EN Cu-OF (CW008A) and GB TU1 or TU2. The higher-purity grade is UNS C10100, EN Cu-OFE (CW009A), JIS C1011 and GB TU00. C1020 covers busbars, terminals, transformer strip and most electrical parts; C10100 is for vacuum and electron devices.
Side-by-side data
| C1020 | C10100 | C10700 | |
|---|---|---|---|
| UNS | C10200 | C10100 | C10700 |
| Equivalents | EN Cu-OF / CW008A; JIS C1020; GB TU1 / TU2 | EN Cu-OFE / CW009A; JIS C1011; GB TU00 | EN CuAg0.10(OF) |
| Composition % | Cu ≥ 99.96, O ≤ 10 ppm | Cu ≥ 99.99, O ≤ 5 ppm | Cu + Ag ≥ 99.95, Ag ≥ 0.085 |
| Conductivity %IACS | ≥ 100 | ≥ 101 | ≥ 100 |
| Tensile strength MPa | 195 – 315 | 195 – 315 | – |
| Tempers | O, 1/4H, 1/2H, H | O, 1/2H, H | – |
| Elastic modulus | 117 GPa | 117 GPa | – |
| Density | 8.94 g/cm³ | 8.94 g/cm³ | 8.94 g/cm³ |
Tensile strength is the range across supplied tempers. Full composition, tempers and physical properties are on each grade page.
Choose C1020 (C10200, Cu-OF) when
- The part is a busbar, terminal, battery tab, transformer or cable strip, or heat spreader
- It will be brazed or welded and must not suffer hydrogen embrittlement
- Volume is high and cost per tonne matters
Choose C10100 (Cu-OFE) when
- The drawing calls for 99.99 % copper or Cu-OFE
- The part works in vacuum or in an electron device
Choose silver-bearing copper (C10700) when
- The rolled-hard part must stay hard after soldering or sustained heating
Notes
Standards differ slightly in their purity and oxygen limits, so an equivalent is a close match and the mill test certificate should be checked against the standard named on your drawing. For scheduled export supply, tell us the monthly tonnage, dimensions, temper, the standard to certify against and the destination port.
Questions buyers ask
Is EN Cu-OF the same as JIS C1020?
They are the corresponding grades in the two systems and are commonly substituted for each other. State which standard the certificate must reference.
Need a recommendation for a specific part?
Tell us the part function, strip thickness and performance targets. We reply within one working day, and sample coils are available for comparative trials.
Material development support